Custom Audio Electronics KPM202 Скачать руководство пользователя страница 87 | Manualshive

Страница: 87 / 116

Custom Audio Electronics KPM202 Скачать руководство пользователя страница 87

In CUSTOM/POS emulation, it is possible to use TrueType fonts. To be used, a TrueType font must be monospace type
(every character of the font must have the same dimension). The check is made by the device when the font is selected.

TrueType fonts will be automatically scaled by the device in order to obtain the same available width for the embedded
fonts (11, 15 and 20 cpi for the 200 dpi model and 16, 23 and 30 cpi for the 300 dpi model).

The quality of TrueType fonts and the correct positioning into the printable area will result from the font producers and the
font implementation.

For the correct printing of the code tables, it is necessary that the selected TrueType font contains all the characters in the

tables. Otherwise, the ‘�’ symbol will be printed instead the missing character. All commands for printing coniguration are

usable both with TrueType fonts and with embedded fonts.
It is possible to address the TrueType font respects the UNICODE™ standard (see www.unicode.org), by using UTF-8 or
UTF-16 encoding.

87

«
...
85
86
87
88
89
...
»

Содержание KPM202





















































































































Отзывы:

Нет отзывов