Custom Audio Electronics KPM202, Руководство пользователя, Страница: 112 / 116

13.3 Logos management
It is possible to store new logos in addition to default logos stored on lash drive. The device automatically provides to
convert BMP image to the error-diffusion format in black and white.
It is possible to add the new logo directly into the folder “PICTURES” on the lash drive of the device.
You can enter the lash drive by iles sharing from Mass Storage. In this case, the relative parameter should be enabled
during the coniguration process (see chapter 6).
After adding the logo, open the coniguration ile “PictList.ini” and add a new line with a number associated to the logo
(to be used with device’s commands), a letter for the memory unit and the logo ile name, as indicated in the instructions
written inside the “PictList.ini” ile.
To delete a logo stored in the device, proceed as follows:
1.
delete the selected logo from the “Pictures” folder on lash drive
2.
in the coniguration ile “PictList.ini”, delete the line related to the erased logo.
The logos stored into the lash drive or the SD/MMC card and converted by the device, can be printed by using the number
associated to the logo during the conversion step.
The correspondence between ile-name and logo-number is warrant by the coniguration ile “PIctList.ini” and it is veriiable
with the logo test.
13.4 Fonts management
It is possible to store new font in addition to default fonts stored on lash drive by adding the new font directly into the folder
“FONTS” on the lash drive of the device.
You can enter the lash drive by iles sharing from Mass Storage. In this case, the relative parameter should be enabled
during the coniguration process (see chapter 6).
NOTE:
Uploading the new font directly from the “Font” folder of Microsoft
®
Windows
®
directory, remember that the displayed
font name into the “Font” folder may not match the real name of the font ile.
112