Custom Audio Electronics FX3850N, Руководство пользователя

Страница: 8 / 14

5.6 Mute function
It is possible to mute the microphone during a conversation so you can speak openly without
being heard by your correspondent. Press the Mute button once during a conversation to
deactivate or again to reactivate the microphone.(look for the mute symbol on the display)
5.7 Setting the speaker volume
During a conversation you can set the volume by pressing the
5.8 Paging
When you BRIEFLY press the Paging button on the base unit, all handsets will emit a ringing
signal for 20 seconds. This signal helps you find a lost handset. Press any key on each
handset to stop the ringing DO NOT HOLD THE PAGE KEY FOR MORE THAN 2 SECONDS
OR YOU MAY ACCIDENTALLY ENTER THE PROGRAMMING MODE
5.9 Flash (Call Waiting) and
Pause buttons
These features give you the ability to use special services from your telephone provider or to
transfer calls if you have a telephone exchange.
(When you press the flash button, the unit generates a line interruption).
If you wish to insert a dialling pause during dialling or in memory, press the Redial / Pause
button on the location where you want a pause inserted.
5.9.1 Setting the Flash time
Press and hold the redial button for 3 seconds. The display will show 'S' for 100ms or 'L' for
250ms. The flash time setting will disappear from the display after 2 seconds.
For New Zealand the default is 250ms long flash
5.10 Setting the Ring Volume, Melody or Ringer "ON" and "OFF
5.10.1 Handset Melody
In standby mode
Press and Hold the "Volume" ( Melody) button until the current melody is
heard. Select the desired melody (1-9) by means of the scroll keys or by entering a keypad
number (1 - 9).
Press "Volume" again to confirm the setting.
5.10.2 Handset Ring Volume
In standby mode
Briefly press the volume button. The handset will ring at the current
volume. Press key 1-5 or use the scroll keys to select the desired volume.
Press "Volume" again to confirm the setting.
5.10.3 Ringer On / Off
You can turn the ringer off and on by pressing and holding the "Star" key for three seconds
when in standby mode. (look for the bell symbol on the display)
5.11 Key lock
When the keypad is locked, pressing any key will have no effect during standby (except
holding the lock key).
Press and hold the lock key. The "key" symbol will appear on the display. Press and hold the
lock key again to un-lock the keypad
Volume button followed by a
number 1 -5 (5 being the loudest- default setting is 3)
This will change the volume setting on all future calls including hands free calls, until the
volume is changed again.
5.12 Hold
For a single handset an incoming call can be placed on hold by pressing the "Int" button. To
pick up the call again press the "Mute" button. With multiple handsets this method is used to
hold or transfer calls between handsets
6