Custom Audio Electronics FX3850N, Руководство пользователя

Страница: 6 / 14

3. Installation
Plug one end of the phone cable into the phone unit and the other end into the telephone
line wall socket. Connect the small plug of the AC adaptor to the phone and the other end of
the adaptor cable to the electric socket and switch on.
Insert the two rechargeable AAA batteries into the battery compartment paying attention to
the polarity
Put the handset on the base unit. The red Charge LED will light as long as the handset is on
the base. Charge the handset for a period of 15 hours before using the handset for the first
time. To extend the battery life time, discharge the batteries completely from time to time.
As soon as the handset emits a warning tone or when the battery icon is empty, you have to
put it back on the base unit for charging.
4. Batteries
When the batteries are low or flat the handset will no longer work. When the batteries are
completely flat and you have put the handset on the base unit for a short period of time, the
Battery symbol will appear to be fully charged but this is actually not the case. The battery
capacity will decrease rapidly. We advise you to put the handset on the base unit for 12 hrs
so that it can be recharged completely:
Full battery Empty battery
When you are in the middle of a conversation and the battery is almost empty, the handset
will emit a warning signal. Place the handset on the base unit to charge as soon as possible
Replace batteries when performance drops and standby time is reduced.
T E K C O S . L E T
d r o c e n o h p e l e T
e l b a c r e w o P
e s a B
r e g r a h c i t l u M
-- + +
+ + --
+ -
- +
4