Custom Audio Electronics FX3850N, Руководство пользователя, Страница: 11 / 14

7 Using Multiple Handsets .
(factory twin and triple sets purchased pre programmed)
There is not a "master" handset. All handsets in the group have the same authority and
features.
Only the main base can be connected to the outside phone line. All handsets communicate
internally and externally via that base. The other small bases are just for charging the other
handsets. (these do not need to be used if you prefer just one charger shared between all
handsets).
If the handset you are trying to contact is busy on an internal call or you try and pick up the
outside line and it is already connected to another handset you will get the "three beep" busy
tone and won't be connected.
Call Transfer, Conference Call, Intercom between Handsets
Practice these procedures at a quiet time to become familiar with them.
Pay attention that all handsets are disconnected at the end of a conference call or call
transfer, to prevent tying up the line.
7.1 Internal Calls (intercom)
In standby mode press the "INT" INTERCOM key followed by the number (1-4) of the other
handset you wish to call. The other handset will start to ring and can answer by pressing the
line button. Then you can talk internally. The number of the handset calling and the intercom
icon will be displayed.
Either handset can press the Line button to end the call
7.2 Call transfer.
During an external call the "ACTIVE" handset can press the "INT" (intercom) key followed by
the number (1-4) of the "OTHER" other handset. The "OTHER" handset will start to ring:
When the "OTHER" handset answers, both handsets can talk internally.
During this internal conversation, if either handset "hangs up", the external line will be
connected with the remaining handset.
Alternatively during the internal conversation above, the "ACTIVE" handset can press the
INTERCOM key again to return to the external call or press the Line button to disconnect and
send the call to the other handset, or press the intercom button for three seconds to begin a
conference call.
7.3 Conference call
Begin the same as call transfer above but this time during the internal conversation the
"ACTIVE" handset now presses the "INT" INTERCOM key for 3 seconds.
Now you can have a three way conversation with the 2nd handset and external line at the
same time (conference call).You can also connect the same way to the third handset and
have a four way conversation.
Any handset can press their Line button to disconnect and leave the call with the other
handsets. All must hang up to end the call.
9