Custom Audio Electronics FH190SP Скачать руководство пользователя страница 18

Страница: 18 / 68

2. INTERFACES

FH190SP

2.3 REAL TIME CLOCK (option)

The Real Time Clock is available as an option.
Printing and adjustment of the clock are managed by a series of control
characters, described as follows.

N.B.
For the real time clock control characters, please refer to
description of the printer command sets in chapter 3.

2.3.1 Adjusting the clock through the keypad

The time and date can be adjusted using the PRINT and FEED keys on the
printer’s front panel. To set, proceed as follows:

•

While holding down the FEED key, press the PRINT key. The printer will
print the time and date with an arrow indicating the digit to be modified;

• Each time the PRINT key is pressed, the digit marked by the arrow will

increase and an updated version will be printed;

• To proceed to modify another digit, press the FEED key again. Each

time the printer will print the updated time and date, highlighting with an
arrow the currently selected digit;

• To terminate the setting procedure, press PRINT and FEED at the
same time.

Содержание FH190SP





































































Результаты поиска

Содержание FH190SP

Отзывы:

Похожие инструкции для FH190SP

Бренды по названию

Популярные бренды

Custom Audio Electronics FH190SP, Руководство пользователя

Результаты поиска

Содержание FH190SP

Отзывы:

Похожие инструкции для FH190SP

Бренды по названию

Популярные бренды