INTRODUCTION
FH190SP
4
DESCRIPTION OF THE PRINTER
The FH190SP printer has an ABS casing (1) with a front cover (2) which
opens to allow access to the paper roll and print head.
The control panel is located on the front (3) and has a PRINT key, a FEED
key and two LEDs: Power and Status.
•
PRINT key. When pressed, it causes the transmission, in serial, of the
control character “$0D”, if this has been enabled at the printer setup
stage. The J6 connector, which can be used for connecting an external
key, is parallel to the PRINT key (fig.1.1).
•
FEED key. When this is pressed the paper feeds forward manually. If
this key is pressed briefly, when the RTCK option is installed, the date
and time of day is printed.
•
The POWER LED indicates that the the printer is receiving a digital
power supply.
•
The STATUS LED, when lit, signals that the printer motor is ON.
(Fig.2)
