1. INSTALLATION AND USE
FH190SP
4
1-
.
1.5 MAINTENANCE
1.5.1 Changing the paper roll
To change the paper roll, proceed as follows:
1)
Open the printer cover and press down the swinging support of the
print mechanism at the point marked PUSH;
2)
Insert the end of the roll in the slit of the print mechanism;
3)
Press the FEED key; a few centimetres of paper automatically feed out
of the printer;
4)
Re-close the swinging support, tear off the paper and re-close the
cover.
WARNING
Before inserting the paper,
ensure that it is cut evenly
1.6 PRECAUTIONS
WARNING:
• Do not print without paper and/or ink ribbon; this leads to the
rapid deterioration of the print needles.
• Do not pull the printer carriage manually when it is switched on.
• Do not put objects inside the printer.
• Avoid blows to any part of the printer, both during and after
installation.
(Fig.1.2)
