User Manual, MAR-5915-3x
Chapter 2 Operation
MNL-0659-01 Rev A7
ECO-5592
Effective: 05 Feb 19
Page 21 of 39
Horizontal Mounting
To install the DuraMAR5915-3X on its side (horizontal):
1. Create a hole pattern on the mounting surface that matches the pattern shown in Figure 4. The
mounting holes are 0.33
” in diameter.
2. Attach the switch to the mounting surface using the two side mounting holes. Attachment screws
should be 5/16-18.
Important!
Ensure that mounting screw length allows proper thread engagement of the mounting hardware but is
not so long that the screw bottoms out in the side mounting hole.
Figure 4. Side Mounting Holes
.400”