FreshTrac Receiver Removal
The FreshTrac receiver can be removed from the decanter
when it needs to be replaced due to the battery expiring or
EVFUPUIFEFDBOUFSCSFBLJOH
1
'PSTBGFUZMBZBUPXFMPVUPOUPQPGBEFTLPS
countertop and place the decanter on top.
2 Remove the receiver by pressing down on the edge of
UIFDMJQXIFSFJUIPPLTPOUPUIFIBOEMF5IFSFDFJWFS
TIPVMEDPNFPGGXJUImOHFSQSFTTVSF
FreshTrac Receiver Installation
The FreshTrac receiver attaches to the left side of the
decanter. It is held in place on the decanter by a pin and
BDMJQXJUIBTOBQFEHF.BLFTVSFUIBUUIFSFQMBDFNFOU
Curtis decanter is FreshTrac compatible (has a hole in the
handle).
1 Position the receiver into the recessed area of the
handle as shown.
2 Press the receiver into the handle to attach. The
receiver should snap into place.
3 Position the decanter on an Alpha FreshTrac brewer
BOESVOBUFTUCSFXUPNBLFTVSFUIFSFDFJWFSPQFSBUFT
OPSNBMMZ7FSJGZUIBUUIF'SFTI5SBDSFDFJWFSnBTIFTmWF
times when the BREW button is pressed. See
Using the
FreshTrac Timer
on the previous page for more details.
OPERATING INSTRUCTIONS
OI26
ALPHA FRESHTRAC, OPERATING INSTRUCTIONS
100317NC
WARNING:
"WPJE CFJOH DVU CZ CSPLFO HMBTT *G
SFNPWJOHUIFSFDFJWFSGSPNBCSPLFOEFDBOUFSVTFB
IBNNFS PS QMJFST UP LOPDL MPPTF BOZ SFNBJOJOH
glass shards still attached to the handle before
removing the receiver.
WARNING:
Avoid using metal tools when installing
the receiver. Do not use excessive force to press the
receiver onto the handle.
Do not dispose of the FreshTrac receiver in an
ordinary trash container. Contact you local
municipality to determine acceptable procedures
for disposal of electronic waste.
FreshTrac
receiver.
FreshTrac
receiver
Press down
on edge of
clip to remove
FreshTrac
receiver
