manualshive.com logo in svg

Curtis 1212S, Руководство пользователя

Поделиться
Скачать
Curtis 1212S Скачать руководство пользователя страница 46

Curtis 1212S Manual, 

Rev. B

43

APPENDIX D:  PROGRAMMING DEVICES

APPENDIX D

PROGRAMMING DEVICES

Curtis programmers provide programming, diagnostic, and test capabilities for 
the 1212S controllers. The power for operating the programmer is supplied by 
the host controller via a 4-pin connector. When the programmer powers up, it 
gathers information from the controller.

Two types of programming devices are available: the 1314 PC Program-

ming Station and the 1313 handheld programmer. The Programming Station 
has the advantage of a large, easily read screen; on the other hand, the hand-
held programmer (with its 45×60mm screen) has the advantage of being more 
portable and hence convenient for making adjustments in the field. 

Both programmers are available in User, Service, Dealer, and OEM ver-

sions. Each programmer can perform the actions available at its own level and 
the levels below that—a User-access programmer can operate at only the User 
level, whereas an OEM programmer has full access.

PC PROGRAMMING STATION (1314)

The Programming Station is an MS-Windows 32-bit application that runs on 
a standard Windows PC. Instructions for using the Programming Station are 
included with the software.

HANDHELD PROGRAMMER (1313)

The 1313 handheld programmer is functionally equivalent to the PC Pro-
gramming Station; operating instructions are provided in the 1313 manual.  
This programmer replaces the 1311, an earlier model with fewer functions.

PROGRAMMER FUNCTIONS

Programmer functions include:

Parameter adjustment

 — provides access to the individual programmable 

parameters.

Monitoring 

— presents real-time values during vehicle operation; these include 

all inputs and outputs.

Diagnostics and troubleshooting

 — presents diagnostic information, and 

also a means to clear the fault history file.

Programming

 — allows you to save/restore custom parameter settings files 

and also to update the system software (not available on the 1311).

Favorites

 — allows you to create shortcuts to your frequently-used adjustable 

parameters and monitor variables (not available on the 1311).

Содержание 1212S
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды