10
Curtis 1212S Manual,
Rev. B
3 — PROGRAMMABLE PARAMETERS
PROGRAMMABLE PARAMETERS
The 1212S controller has a number of parameters that can be programmed
using a Curtis handheld programmer or Curtis PC Programming Station. These
programmable parameters allow the vehicle’s performance to be customized to
best fit the needs of individual vehicle operators.
For information on programmming devices, see Appendix D.
For information on how to use the parameters to optimize performance,
see Section 6.
The programmable parameters are grouped hierarchically into menus, as shown
in Table 1. Not all of these parameters are displayed on all controllers; the list
for any given controller depends on its specifications.
3
COMPENSATION MENU
................p. 19
—IR Comp
—Anti-Rollback Comp
EMERGENCY REVERSE MENU
.......p. 20
—Speed
—Time Limit
—Decel Rate
—Accel Rate
—Max Braking Current
—Switch Normally Closed
—EMR Interlock
MISCELLANEOUS MENU
...............p. 21
—Sequencing Delay
—Sleep
—Reset Drive Time
—Emergency Stop
—Pump SRO
—Reset Parameter
DRIVE MENU
............................ p. 11
—Accel Max Speed
—Accel Min Speed
—Decel High Speed
—Decel Low Speed
—Rev Accel Max Speed
—Rev Accel Min Speed
—Rev Decel High Speed
—Rev Decel Low Speed
—Key Off Decel
—E Stop Decel
—E Stop Pause
—Soft Start
—Gear Soften
—Creep Speed
—Soft Stop Speed
—Speed ...........................p. 13
—Mode 1
—Max Speed
—Rev Max Speed
—Mode 2 (same)
THROTTLE MENU
........................p. 14
—Type
—PotHigh
—PotLow
—Neutral Deadband
—Throttle Max
—HPD
—Throttle Map
Table 1 Programmable Parameter Menus: 1311 Programmer
CURRENT MENU
.........................p. 16
—Main Current Limit
—Braking Current Limit
—Boost Current
—Boost Time
BRAKE MENU
............................p. 16
—Delay
—Fault Check
—Hold Voltage
—Interlock Decel
—Interlock Brake Timeout
MOTOR MENU
............................p. 17
—System Resistance
—Resistance Auto Comp
—Auto Comp Current Limit
—Speed Scaler
BDI MENU
..................................p. 18
—Full Voltage
—Empty Voltage
—Full Charge Voltage
—Start Charge Voltage
—Reset Voltage
—Discharge Factor
—Charge Factor
—Low BDI Level
—Low BDI Max Speed
—External Lift Lockout
—Lift Lockout Enable
—Lift Lockout Threshold
—Lift Lockout Output Type
