12
Curtis 1212S Manual,
Rev. B
DRIVE MENU, cont’d
ALLOWABLE
PARAMETER
RANGE
DESCRIPTION
E Stop Pause
0.0 – 1.0 s
Sets a pause before reversing direction after an emergency reverse stop.
This gives the operator time to return the throttle to neutral without moving
backwards.
Soft Start
0 – 100 %
This parameter can be used to soften the bump associated with gear
slack in the transaxle when throttle is applied from the neutral state.
Larger values provide a softer slack take-up.
Gear Soften
0 – 100 %
This parameter is intended to soften the bump associated with gear slack
in the transaxle when throttle is released and then reapplied while the
vehicle is still moving. Larger values provide a softer slack take-up.
Creep Speed
0 – 10 %
Creep Speed helps to prevent vehicle rollback on inclines when the brake
is released with very little throttle applied. It is activated when the throttle
request exceeds the throttle deadband threshold.
Soft Stop Speed
0 – 30 %
Sets the speed at which a gentler deceleration is initiated when the throttle
is released to neutral. Larger values start the soft stop deceleration sooner.
3 — PROGRAMMABLE PARAMETERS:
Drive Parameters
