INSTALLATION
8
Moving the Washing Machine from One Location to Another
To remove the transit bolts:
1. Ensure the unit is fully disconnected from
the mains power by unplugging it from
the mains.
2. Unscrew the three (3) transit bolts.
3. They are located at the rear side of the
washing machine. Use a spanner (not
included) to loosen the three (3) transit
bolts, then pull out the bolts horizontally.
Ensure the plastic bolt guides (if any) are
also removed.
4. Snap in the plastic caps to cover the transit
bolt holes.
2
3
1
Keep the three (3) transit bolts in a safe place, in case you need to move the washing machine.
Hose and Cable Lengths
How to connect from the left side
~80cm
~90cm
~85cm
~130cm
~40cm
~135cm
min. 80cm
max. 100cm
How to connect from the right side
Ensure the transit bolts are fixed in place prior to moving the washing machine.
Before you move the washing machine:
• Shut off the tap and run the washing machine to drain the water. Drain any remaining water from
the pump hose.
• Depressurise the water supply hose and remove it.
• Disconnect the unit from the mains.
• Replace the transit bolts (in the reverse order in which you removed them (please see the
Moving
and Installing
section for details).
C510WM13_IB_final_130516_chris.indd 8
16/5/13 11:33 AM
