16
Wash Setting
Standard Washing
1. Press the Power button.
2. Pull the door handle and put the laundry in the drum.
Make sure no washing gets caught in the door.
3. Close the door and turn the Programme Selection
Dial to select your wash programme.
4. Add detergent and softener as required (refer to
“Adding Detergent and Softener” section).
5. Select the required options (refer to “Control Panel”
section).
6. Press the Start/Pause button to start the wash cycle.
The indicator will stop flashing and light continuously.
7. The washing machine beeps when the programme is
complete.
Wool
Power
Cotton
Quick Wash
C
。
40
C
。
20
C
。
40
Spin
Synthetic
Pre-Wash
C
。
30
C
。
60
C
。
90
If the door is locked and you switched the washing
machine off - or if there’s a power cut - it will stay locked
for 1 minute.
Removing Washing (Once program is finished)
1. Open the washing machine door and remove your washing.
2. Remove any foreign objects to avoid risk of rusting.
3. Leave the door and detergent drawer open so that residual water can evaporate.
Door remains locked for 1 minute appro. after wash stopped.
Be careful not to burn yourself while handling your clothes or touching the inside of the drum after
a high temperature wash.
Changing Programmes
If you have accidently selected the wrong programme, you can cancel it and select a new one. We suggest
that you don not change the programme after the machine has been running for 3 minutes.
1. Press the Start/Pause button to pause the current programme.
2. Press and hold the Power button the switch the washing machine off, then press the Power button
again to switch it back on.
3. Turn the Programme Selection Dial to select a new programme.
4. Press the Start/Pause button to start the wash cycle. The indicator will stop flashing and light
continuously.
5. The washing machine beeps when the programme is complete.
C510WM13_IB_final_130516_chris.indd 16
16/5/13 11:33 AM
