18
Cleaning the Filter Net of the Water Supply Hose
If water isn’t filling properly...
1. Turn the water supply off at the tap.
2. Close the washing machine door and select “Spin” programme and press the Start / Pause button.
3. When finished, turn the power off. Loosen the water supply hose and remove it from the tap.
4. Use a small brush, e.g. a toothbrush to clean the filter and water inlet valve.
5. Re-connect the water supply hose to the tap and turn the tap back on, checking for leaks.
5. Turn it clockwise and close the bottom cover.
Cleaning the Drain Filter
Clean the filter once a month.
Before cleaning the drain filter, first start the spin programme, then switch off and unplug the washing
machine.
1. Open the bottom cover.
Service Flap
2. Carefully loosen the drain filter. Turn anti clockwise until the water gently begins to run, this is normal.
3. Remove the filter once the water has stopped.
4. Remove any lint and debris before carefully replacing the filter.
• The filter must be in place, or it may lead to leakage.
• Place a container under the drain pump filter, to collect any excess water that may come out
of the drain pump when the filter is removed.
C510WM13_IB_final_130516_chris.indd 18
16/5/13 11:33 AM
