Cuppone Giotto GT110, Руководство по эксплуатации и обслуживанию

Страница: 15 / 44

15
1 2 3 4 5
6 7 8 9 0
x OK
+ -
X
Imposta valore cielo
90%
2
1
3
Fig.14
Ed. 0722 - 70702562 - REV06 - Valid from serial number21052570 - Giotto - Use and maintenance
temperature in the
cooking chamber
bottom temperature
top power
(percentage)
bottom power
(percentage)
plate rotation settings
(more information on
page
11
)
During cooking or preheating, if the current
temperature in the chamber is:
• lower
than the one set (so the elements
are active), the icons identifying the top
and bottom are
red.
• equal to
or
higher
than the set one (so
the elements are off), the icons identi-
fying the top and bottom are
white.
210
5
SET 150°C
If the displayed bot-
tom temperature (e.g.
210 °C) is higher than
the set temperature
(e.g. 150 °C) but the
icons are white (ele-
ments off), it means that the probe that
detects the bottom temperature is affected
by the accumulation of heat due to the
oven heating. In this case, normally there
are no cooking problems.
Use |
COOKING
“MANUAL” (at the top) means you are working
with parameters set manually.
ENTERING THE RECIPE PARAMETERS MANUALLY
Fig.14
1
Touching the corresponding field, set:
• the
top power (percentage);
• the
temperature in the cooking chamber;
• the
bottom temperature;
• the
bottom power (percentage);
• and, if necessary, the
turntable rotation settings.
2
An alphanumeric keypad will appear on which the desired valued can be set (see table
COOKING INFORMATION
on page
9
).
3 Confirm with or cancel with
CE
. After setting these parameters, the oven starts heating straight away in compliance with the set parameters.