Cuppone Giotto GT110, Руководство по эксплуатации и обслуживанию

Страница: 26 / 44

26
Fig.28
teglia
2
1
04:30
2
B
2
C
3
100
0
Use |
SPECIAL PROGRAMS
MAX program
The
MAX
program is used to quickly raise the temperature of
the cooking chamber and the refractory surface when the user
realizes that they are too low for his needs.
Default values of the MAX program
•
duration:
1 minute
•
temperature:
increase of 30 °C - 86 °F over the chamber
temperature (offset)
•
power:
top and bottom at 100%
STARTING THE PROGRAM
1
To start the program, touch its symbol .
2
A screen appears that allows you to:
2A
start the program
by pressing the key:
in this case the program will last 1 minute
(default duration)
2B
set the duration of the program
by entering the
desired time (e.g. 4:30 minutes) and then 2C start it by
pressing the key.
3
A summary screen appears: touching the
TOP
or
BOTTOM
field it is possible to set the power at
100%
or at
0%
(it is not possible to set powers other than these two values).
The entered values are
temporary
, that is they apply only to
the
MAX
program in progress; to modify its values
permanently
act as explained on page
23
.
set time
The message indicates that the MAX
program is being used. If you intervene
manually by changing some parameters,
an asterisk appears to indicate the external
intervention of the user.
top/bottom power
100% or 0%
PROGRAM END
The program ends:
• When the key is pressed.
• When a different program is selected.
• When the oven is switched off .
• At the end of the default time (1 minute) or that set by the user (for example 4:30 minutes) the buzzer sounds and you return to the program that was active before starting the
MAX
program.