Cuppone Giorgione KGR4, Руководство по предварительной установке и установке

Страница: 14 / 22

14
H
2
O
fig. 5
fig. 6
Be careful not to
overturn the hood
during transport!
fig. 7
3
M5x12
M8x16
5
M5x8
Transport
Fig. 5
fitted with personal protection equipment, transport the
appliance to the installation location.
use suitable equipment, capable of dealing with its weight:
persons not involved with the appliance installation may not
pass through or stand in the work area during the appliance
assembly.
During the transport, pay particular attention to passing
through openings and/or doors.
Preliminary operations
Fig. 6
Carefully remove the protective film.
If any glue residue is left on the surfaces, remove it with soapy
water but without any corrosive or abrasive products or sharp
or pointed instruments.
Check that all the parts making up the hood are in good
condition and without any faults or breakages, if that is
not the case, contact the Dealer for the procedures to
follow.
Assembling the hood
Fig. 7
The hood arrives disassembled in several components that
the installer must assemble following the directions in the fig-
ures from
Fig. 8
to
Fig. 11
)
The fixing screws and the allen screws required for assembly
are contained in the bag supplied with the oven.
Installation