background image

3

Ed. 0121 -  70702530 REV02     Donatello - Pre-installation CP

Fig. 1 

1

 CHECKS BEFORE PURCHASING

A

Check with the owner if in the place of installation there are the tools to handle the oven easily 

 

Fig. 1

To handle the oven correctly, it is necessary to:

• 

have personal protection equipment available (e.g. safety shoes, gloves, etc.)

• 

have lifting equipment available that can handle the appliance safely (check weight and dimensions in the following pages), together with staff qualified to carry out this operation.

B

Check the dimensions of the selected oven and accessories

• 

check that the dimensions of the selected oven are suitable to the available space in the installation room. 

• 

check that the cooking chamber capacity is adequate to the owner's needs.

The “Technical data” section from page 

6

 contains the weights and dimensions of the cooking chamber.

Before purchasing the oven and before its installation,

 check and agree with the owner

 that, on installation, all the following conditions are met; they are indispensable for the correct and safe 

installation, operation and maintenance of the oven.

Содержание Donatello DN 435









































Отзывы: