Cuppone Donatello DN 435, Руководство по предварительной установке и установке

Страница: 24 / 40

24
H
2
O
min.
500 mm
[
19,7in.
]
Max 35°C
Max 70%
Min 5°C
Max 95°F
Min 41°C
Fig. 5 Fig. 6
Fig. 7
Transport
Fig. 5
Fitted with personal protection equipment, transport the appli-
ance to the installation location.
Use a suitable vehicle capable of withstanding the weight of
the same.
Model single double Model single double
DN435 147 kg - 324 lb 252 kg - 555,5 lb DN635L 190 kg - 418,8 lb 324 kg - 714,2 lb
DN635 187 kg - 412,2 lb 330 kg - 727,5 lb DN935 250 kg - 551,1 lb 430 kg - 948 lb
Persons not involved with the appliance installation may not
pass through or stand in the work area during the transport of
the appliance.
During the transport, pay particular attention to passing
through openings and/or doors.
Preliminary operations
Fig. 6
Carefully remove the protective film.
If any glue residue is left on the surfaces, remove it with soapy
water but without any corrosive or abrasive products or sharp
or pointed instruments.
Check that all the parts making up the oven are in good
condition and without any faults or breakages, if that is not
the case, contact the Retailer for the procedures to follow.
Packaging disposal
before starting to install the oven, dispose of the packaging
in accordance with the regulations in force in the country of
installation.
Caution, suffocation hazard! If left unattended, packag-
ing could be potentially dangerous for both children
and animals.
Caution, hindrance hazard! If left unattended, packag-
ing could hinder vehicles and installers during assembly
operations.
Installation