Cuno NLS0500, Инструкция по установке и эксплуатации

Страница: 2 / 21

Congratulations! We believe your purchase of this water
softener will prove to be a very wise choice. When properly
installed, your new softener will provide many years of
trouble-free service. Before starting the installation we
suggest you read this manual all the way through for an
overview, and then follow the installation steps in the proper
sequence. IMPROPER INSTALLATION could void the
warranty.
INSPECTING AND HANDLING YOUR WATER SOFT-
ENER:
Inspect the equipment for shipping damage. If damaged,
notify the transportation company and request a damage
inspection.
Handle the equipment with care. Damage can result if
dropped or if the brine tank is set on sharp, uneven projec-
tions on the floor. When handling, do not turn the water
softener unit upside down.
MAKE SURE YOUR WATER HAS BEEN THOROUGHLY
TESTED:
An analysis of your water should be made prior to the
selection of your water conditioning equipment. Your dealer
will generally perform this service for you, and may send a
sample to the factory for analysis and recommendations.
Enter your analysis below for a permanent record.
Copyright 2005 by Cuno Water Treatment. All rights reserved. Not to be reprinted in any form without written permission.
TABLE OF CONTENTS
SECTION DESCRIPTION
1 BEFORE INSTALLATION
2 INSTALLATION
3 REGENERATION INSTRUCTIONS
(Timer Setting Instructions)
4 SERVICE INSTRUCTIONS
5 SPECIFICATIONS & OPERATING DATA
6 PARTS
7 MAINTENANCE
SECTION 1: BEFORE INSTALLATION
NOTE: Hydrogen sulfide (H
2
S) must be tested for at the well
site. For accuracy, the sample must be drawn with the pump
RUNNING, and the test be completed within ONE minute
after the sample is drawn.
NOTE: Softeners are designed to remove hardness but can
handle reasonable amounts of soluble iron if consideration
is given to content when selecting model and regeneration
settings. To treat sulfur (hydrogen sulfide), bacterial iron,
precipitated iron or very high levels of soluble iron requires
special equipment in addition to a water softener. For best
results, a Chem-Free™ Iron Removal System is recom-
mended for use on waters containing more than 2 ppm of
iron.
ANALYSIS OF YOUR WATER
Hardness ______ gpg
Iron (Fe) ______ ppm
Manganese (Mn) ______ ppm
pH ______
Tannins (Humic Acid) ______ ppm
Hydrogen sulfide (H
2
S) ______ ppm
Other _______________________ ______
Other _______________________ ______
1-1