24
Rotating the large, black feed rollers will rotate all other shafts and rollers in
the machine. These rollers can be rotated in either direction by using fingers.
Generally, the top of these rollers should be rotated forward (direction of note
flow), so any dirt or stray material is moved out of the unit.
•
Press FWD on the display to move rollers forward.
Remove all jammed notes and foreign material.
Action, Step 3
Raise “T” handles
If the jam remains in the paper path, then
raise the two red, plastic “T” handles at the
same time and hook them onto the metal
shaft.
Press FWD on the display to move rollers
forward.
Remove all jammed notes and foreign
material.
When finished, unhook the two red, plastic
“T” handles from the metal shaft and lower
them at the same time.
Lower “T” handles
Action, Step 4
Push the front enclosure back until it clicks into its normal operating position.
Action, Step 5
Replace the feeder plate. Insert the curved edge of the feeder plate first.
Gently press down on the feeder plate until it snaps into position.
Action, Step 6
Return hopper to the operating position.
Press CONT.
Rerun all notes that were in the hopper and both pockets at the time of
the jam.
Curved edge
Two-Pocket Universal JetScan
®
Note Scanner
All Models