CUMMINS ALLISON Universal JetScan Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 26

CUMMINS ALLISON Universal JetScan Скачать руководство пользователя страница 20

19

Condition

Action

If Universal JetScan is configured

in SETUP to stop on non-oriented

notes, it will stop and display

“ORIENTATION ERROR” when a

non-oriented note is processed.

Remove the top note in the pocket indicated on the screen, correct its

orientation, and put it back in the same pocket. Then press CONT. This

note will be added to the appropriate batch (strap), sub-batch, batch and

day totals.

Condition

Action

Universal JetScan has identified a

note that is different than those

being processed.

Remove the top note from the pocket indicated on the screen. Press CONT

to continue.
If stranger record is ON in SETUP, then the value of the stranger note is

added to the denomination’s batch (strap), sub-batch, batch and day totals.

Condition

Action

Universal JetScan has identified a

sorting error in the pocket

indicated on the screen.

Remove all notes from the pocket indicated on the screen and place them

in the hopper. Then press CONT.

© 2014 Cummins-Allison Corp.

«
...
18
19
20
21
22
...
»

Содержание Universal JetScan



























Отзывы:

Нет отзывов