CUMMINS ALLISON JetTouch, Руководство по эксплуатации

Страница: 10 / 10

18 | JetTouch ® Workstation | Stopping Conditions and Recovery Steps Daily Cleaning Procedures | JetTouch ® Workstation | 19
About to Clear System
Condition
CLEAR SYSTEM was
pressed on the SUPERVISOR MENU .
Action Do the following:
• Press CLEAR to clear the system.
• Press CANCEL to return to the
SUPERVISOR MENU
.
Totals Have Already
Been Exported
Condition EXPORT DAY TOTALS
was
pressed on the SUPERVISOR MENU , and
the day totals file had already been
exported earlier that day.
Action
Do the following:
• Press OK to export day totals again.
• Press CANCEL to return to the
SUPERVISOR MENU .
Export Day Totals
Condition
CLEAR SYSTEM was
pressed on the
SUPERVISOR MENU
prior
to exporting day totals. The system and
totals cannot be cleared until the day
totals file is exported.
Action Do the following:
1. Press
EXPORT DAY TOTALS
on the
SUPERVISOR MENU .
2. Press CLEAR SYSTEM on the
SUPERVISOR MENU
.
Value Too Large
Condition
The number of characters
entered into a field exceeded the limit.
Action Press OK and enter a valid
number.
Stopping Conditions and Recovery Steps
The following conditions cause the JetTouch workstation to stop and require action by
the user.
Daily Cleaning Procedures for the PC Terminal
Recommended Cleaning Materials
Simple Green, the recommended cleaning agent, can be an eye
irritant. Avoid eye contact.
If eye contact occurs, flush eye(s) with cool water for 5 minutes
– remove contact lenses if present – continue flushing eye(s)
with cool water for 15 more minutes. If irritation persists,
consult physician.
Individuals with sensitive skin should rinse hands after using.
• Microfiber towels. (Part number: 022-2223-00.)
A dry or pre-moistened microfiber towel may be used.
If using Simple Green concentrate, dilute to: 1 ounce of Simple Green per
8 ounces of water. For material-safety-data sheets, see simplegreen.com.
Daily Cleaning
1. Wipe the PC terminal’s touch-screen display with a dry or pre-moistened
microfiber towel.
2. Wipe the PC terminal’s exterior surfaces with a dry or pre-moistened microfiber
towel.