CULLMANN CuLight FR 36MFT, Руководство пользователя

Страница: 5 / 13

35 34
• What’s in the Box of CUlight FR 36MFT?
1. Flash unit 2. Mini stand 3. Protection case 4. Diffuser 5. In-
struction manual
• Separately Sold Accessories
The product can be used in combination with the followingsepa-
rately sold accessories:
1. CUlight 2.4 GHz Transmitter RT 500MFT
2. CUlight Softbox Kit with Flashgun Holder SB 40-40 Kit
3. CUlight Softbox Kit with Flashgun Holder SB 60-60 Kit
4. CUlight Light Stand LS 2000 (216 cm)
5. CUlight Light Stand LS 2500 (308 cm)
Attaching to a Camera
1
Attach the Camera Flash.
• Slip the camera flash’s
mounting foot into the
camera’s hotshoe all the
way.
2
Secure the Camera Flash.
• Rotate the lock ring on
the mounting foot until it
locks up.
3
Detach the Camera Flash.
• Rotate the lock ring on the
mounting foot until it is
loosened.
Power Management
Use Power Switch to power the flash unit on (Long press the
button for one second) or off. Turn off if it will not be used for an
extended period of time. Setting as a master flash, it will turn the
power off automatically after a certain period (approx. 90 sec-
onds) of idle use. Pressing the camera shutter halfway or press-
ing any flash button will wake up the flash unit. Setting as a slave
flash, it will enter sleep mode after a certain period (adjustable,
60 minutes by default) of idle use. Pressing any flash button will
wake it up.
C.Fn
Disabling Auto Power Off function is recommended
when the flash is used off camera. (C.Fn-ST, Page 46)
Flash Mode: TTL Autoflash
This flash has three flash modes: TTL, Manual (M), and Multi
(Stroboscopic). In TTL mode, the camera and the flash will work
together to calculate the correct exposure for the subject and the
background. In this mode, multiple TTL functions are available:
FEC, HSS, second curtain sync, etc.
* Press <
MODE > Mode Selection Button and three flash modes
will display on the LCD panel one by one with each pressing.
TTL Mode
Press < MODE > Mode Selection Button to enter TTL mode. The
LCD panel will display < TTL >.
• Press the camera release button halfway to focus.
• When the shutter button is fully pressed, the flash will fire a pre-
flash that the camera will use to calculate exposure and flash
output the instant before the photo is taken.
Display “ HI ”: When the flash output value is up to the maximum
value, “HI” will be displayed and blinking for 3 seconds. Adjust
the camera’s parameters if underexposure appears.
Display “
Lo ”: When the flash output value is up to the minimum
value, “Lo” will be displayed and blinking for 3 seconds. Adjust
the camera’s parameters if overexposure appears.
FR36_BDA_Olympus 171005.indd 34-35 06.10.2017 15:11:33