background image

29

28

Foreword

Thank you for purchasing this product.

This CUlight FR 36MFT camera flash applies to Olympus/Pana-

sonic series cameras and is compatible with TTL autoflash. With 

this TTL compatible flash, your shooting will become simpler. 

You can easily achieve a correct flash exposure even in complex 

light-changing environments. This camera flash features:

•  

GN36 (m ISO 100, @105mm).

•  

Fully support Olympus/Panasonic TTL camera flash. Workable 

as Master or Slave unit in a wireless flash group.

•  

With built-in 2.4GHz wireless remote system to support trans-

mitting and receiving.

•  

Provided multiple functions, include manual flash, multi flash, 

HSS (up to 1/8000s), second curtain sync, FEC, etc.

•  

Support with firmware upgrade.

For Your  Safety

  Always keep this product dry. Do not use in rain or in damp 

conditions.

  This product contains high-voltage electronic parts. Touching 

the high-voltage circuit inside it may result in electric shock. 

Do not disassemble. Should repairs become necessary, this 

product must be sent to an authorized maintenance center.

  Stop using this product if it breaks open due to extrusion, fall-

ing or strong hit. Otherwise, electric shock may occur if you 

touch the electronic parts inside it.

  Do not fire the flash directly into the eyes (especially those of 

babies) within short distances. Otherwise visual impairment 

may occur. When taking pictures for babies, keep the flash unit 

at least 1 meter (3.3 feet) away from them. Using bounce flash 

to reduce light intensity is also recommended.

  Do not use the flash unit in the presence of flammable gases, 

chemicals and other similar materials. In certain circumstanc-

es, these materials may be sensitive to the strong light emit-

ting from this flash unit and fire or electromagnetic interfer-

ence may result.

  Do not leave or store the flash unit in places where the ambi-

ent temperature reads over 50°C (e.g. in automobile). Other-

wise the electronic parts may be damaged.

FR36_BDA_Olympus 171005.indd   28-29

06.10.2017   15:11:32

Содержание CuLight FR 36MFT














Отзывы: