Introduction
3
Culligan Aquasential Select Plus & Select Series Iron-OX5 & Sulfur-OX3 Water Filters 01040683
Read this Manual First
Before you operate the Culligan
®
Aquasential
™
Select Plus
™
Iron-OX5 & Sulfur-OX3™ Water Filters systems, read this
manual to become familiar with the device and its capabilities. This product is designed to meet the needs of applications for
high quality water. This manual contains important information about the unit, including information needed for installation,
operating, and maintenance procedures. A troubleshooting section provides a guide for quick and accurate problem solving.
The Culligan
®
Aquasential
™
Select Plus Iron-OX5
™
water filter systems have been tested and
certified by WQA against NSF/ANSI Standard 372, CSA B483.1, and NSF/ANSI Standard 42 for the
effective reduction of iron up to 500 gallons as verified and substantiated by test data.
The Culligan
®
Aquasential
™
Select Plus Sulfur-OX3
™
water filter systems have been tested and
certified by WQA against NSF/ANSI Standard 372, CSA B483.1, and NSF/ANSI Standard 42 for the
effective reduction of hydrogen sulfide up to 500 gallons as verified and substantiated by test data.
The Culligan
®
Aquasential
™
Select Plus Iron-OX5
™
Outdoor water filter systems have been tested
and certified by WQA against NSF/ANSI Standard 372 and NSF/ANSI standard 42 for the effective reduction of iron
up to 500 gallons as verified and substantiated by test data.
The Culligan
®
Aquasential
™
Select Plus Sulfur-OX3
™
Outdoor water filter systems have been tested and certified by
WQA against NSF/ANSI Standard 372 and Standard NSF/ANSI 42 for the effective reduction of hydrogen sulfide up
to 500 gallons as verified and substantiated by test data.
In order for the water treatment system to continue to provide high quality water, you must develop a thorough
understanding of the system and its operation. Review this manual before making any attempt to install, operate, or
service the system. Installation or maintenance done on this system by an untrained service person can cause major
damage to equipment or property damage.
Licensed plumbers know that standard industry procedures include only to hand tighten or use strap wrenches on plastic parts.
Plastic piping systems must be installed, operated and maintained in accordance with accepted standards and procedures.
Not adhering to the recommended service/maintenance can cause damage to equipment or property damage.
This manual is based on information available at the time it was finalized, approved, and published. Continuing design refinement
could cause changes that may not be included in this publication.
Your local independently operated Culligan dealer employs trained service and maintenance personnel who are experienced
in the installation, function and repair of Culligan equipment. This publication is written specifically for these individuals and is
intended for their use.
We encourage Culligan users to learn about Culligan products, but we believe that product knowledge is best obtained by
consulting with your Culligan dealer. Untrained individuals who use this manual assume the risk of any resulting property
damage or personal injury.
NOTE!
This system and its installation must comply with state and local regulations. The use of saddle valves is
not permitted.
An Owners Guide is available online; it contains answers to most questions, system operation
information, suggested maintenance, and a trouble shooting section.
www.culligan.com/support/product-information/product-manuals
This system is to be supplied with cold water only.
Introduction
