19
Replacing the mains supply cable
If the mains supply cable is damaged, then it must be replaced by an
appropriate replacement which can be obtained via the manufacturer
or its service agents, in order to avoid hazard.
The mains supply cable should be replaced in accordance with the
following instructions:
o
Switch the appliance off at the socket.
o
Open the terminal block on the underside of the cooktop.
o
Unscrew the terminal screws fixing the cable.
o
Replace the cable with one of the same length and in accordance
with the specification given on pages 17 - 18.
o
The “green
-
yellow” earth wire must be connected to the terminal
marked
. It must be about 10 mm longer than the live and
neutral wires.
o
The “blue” neutral wire must be connected to the terminal
marked with letter (N) - the live wire must be connected to the
terminal marked with letter (L).
