17
cooktop. Slightly tighten a screw
(B)
through the clamp
(A)
so
that the clamp is attached to the cooktop, but so that you can
still adjust the position of it.
o
On the underneath of the cooktop, adjust the clamps into a
position that is suitable for your worktop. Then fully tighten the
screws
(B)
to secure the cooktop into position.
Electrical connection
This appliance must be installed by a qualified
person in accordance with the latest edition of the
Regulations currently in force and in compliance
with the manufacturer’s
instructions.
o
AS/NZS 3000: 2007 Wiring Regulations
o
2010 Electricity Safety Regulations
Before connecting the appliance, make sure that the supply voltage
marked on the rating plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
o
The appliance must be wired into a
30A
double pole switched
fused spur outlet, having 3 mm contact separation and placed in
an easily accessible position adjacent to the appliance. It should
not be located above the appliance and no more than 1.25m
away from it.
o
The spur outlet must still be accessible even when your cooktop
is located in its operating position.
Connecting the mains supply cable
