Culina ICONCG60RF, Инструкция по эксплуатации

Страница: 17 / 24

Installation
All installation must be carried out by a competent person or qualified electrician
Before connecting the mains supply ensure that the mains voltage corresponds
to the voltage on the rating plate.
Direct Connection
The appliance must be connected directly to the mains using an omnipolar
circuit breaker with a minimum opening of 3mm between the contacts.
The installer must ensure that the correct electrical connection has been made
and that it complies with the wiring diagram.The cable must not be bent or
compressed.
Regularly check the power plug and power cord for damage. If the supply cord is
damaged, it must be replaced by a special cord or assembly available from the
manufacturer or its service agent.
WARNING: This is a Class I appliance and MUST be earthed.
This appliance is supplied with a 3 core mains cable coloured as follows:
Brown = L
or Live
Blue = N or Neutral
Green and Yellow = E or Earth
N
L
N
L
(
Blue)
(
Brown)
N
L
USE A 3AMP FUSE
DOUBLE POLE SWITCHED
FUSED SPUR OUTLET
EUR
UK
(
Green and Yellow)
To avoid the risks that are always present when you use an electrical appliance it
is important that this appliance is installed correctly and that you read the safety
instructions carefully to avoid misuse and hazards. Please keep this instruction
booklet for future reference and pass it on to any future owners. After unpacking the
appliance please check that it is not damaged. If in doubt, do not use the appliance
but contact Customer Services - see end of Care & maintenance section for details.
Once the electrical connection point and routing of the mains
cable is established ensure that any excess cable is secured in
such a way to prevent it falling into the motor housing and
damaging the appliance.
Installation
...
17