Culina ICONCG60RF, Инструкция по эксплуатации

Страница: 20 / 24

20
Pressing the Speed Reduction or Speed Increase icon during a current timer
program will restart the countdown process again with a five minute cycle
If the Timer icon is pressed again during a current timer program, the cycle
will be cancelled, the icon will revert to white and the current fan speed will remain
on indefinitel y .
The maximum timer program cycle is 15 minutes: 5 minutes on P and then
2 minutes each on speed 5 down to speed 1.
Controlling the cooker hood remotely
Before First Use
This cooker hood model ICONCG60RF and the ceramic hob model
ICON C ER60RF must be paired by radio frequency before remote control
can occur. This only needs to be done once.
When connected the power output of the ceramic hob will control the
extraction rate of the cooker hood.
To Set Up Connectivity
1.Make sure that the hob and the hood are switched off.
2.Press the Timer icon and Light icon together on the control panel.
The LED display will alternately f l ash red and white.
3.Turn on the hob and make sure the connectivity indicator is lit red.
Note: Simultaneously press the "-" key and the "+" key on the hob if it is
not lit.
4
.
Press the keys and together on the hob and the connection
indicator will flash to confirm connection .
5.The control panel of the hood will show A for f i ve seconds to indicate
connectivity has been made with the hob.
6.Press the keys and together on the hob one more time to store the
connectivity settings.
I
MPORTANT
:The connectivity operation above must be completed
within two minutes of turning on the power to the hood. If this is not
successful, switch off both the hood and the hob, wait for one minute
and attempt the connectivity again.
Use
Use
...
IMPORTANT: This section is only applicable if you have purchased
the optional.Cooker Hood Model:ICONCG60RF