4
FEATURES AND BENEFITS
1. Cover
Just press on. Tightfitting seal
resists leakage.
2. 2-oz. Measured Pour Lid
Allows you to measure and add
ingredients without removing
the cover.
3. 60-oz. Glass Jar with
Pour Spout
Has a unique, sturdy, widemouth
design and a pour spout.
4. Leak-proof Rubber Gasket
(not shown)
Holds the glass jar snugly in
position for safe operation.
5. High-quality Cutting Assembly
with Patented Stainless
Steel Blades
Is strong enough for all blender
tasks, including tough jobs, from
ice crushing to chopping delicate herbs.
6. Locking Ring
Is self-aligning so that the glass blender jar screws easily into
position.
7. Heavy-duty Motor Base
Is so sturdy and stable, it will not “walk” on your counter – even
during ice crushing!
8. Preprogrammed 6-Speed Push-button Controls
Is easy to use, read and clean. The red LED lights clearly indicate
what blender speed you are using.
8a. Pulse at Any Speed Button
Allows you to pulse at any speed from high to low, so you can
blend ingredients only as much as needed.
8b. Ice Crush Button
This button is preset to the best speed for crushed ice.
9. Slip-proof Feet
Prevent movement during use and prevent damaging marks
on countertops or tables.
10. Cord Storage (not shown)
Keeps countertop safe and neat by storing excess cord conveniently.
USE AND CARE
ASSEMBLY
To use your Cuisinart
®
Supreme Super 600
™
Blender, begin by assembling the blender jar.
1. Turn the blender jar (a) upside down, and
place it flat on a sturdy surface.
2. Position the rubber gasket (b) on the round
opening on the bottom of the blender jar.
3. Turn the cutting assembly (c) upside down,
and place the blade end in the blender
jar opening.
Note: Blades are sharp... handle carefully.
4. Secure the rubber gasket and cutting
assembly into position by placing the smaller opening of the locking
ring (d) on top of the cutting assembly. Engage threads by twisting
the locking ring clockwise until tightened. Make sure locking ring is
tightly fastened to blender jar. Once assembled, turn the blender jar
right side up.
Note: Never place blade assembly on base unless
assembled to jar.
5. Push the cover onto the top of the blender jar. Push the measured
pour lid into the cover.
6. Place the blender jar on the motor base so that the jar markings are
facing you and the handle is positioned to one side.
7. Plug in power cord. Your blender is now ready to be used.
Note: Blades are sharp...
handle carefully.
2
1
3
5
6
7
8
8a
8b
9
(d)
(c)
(b)
(a)