10
i
i. BREW TEA
1. Place the tea maker on a flat surface.
2. Remove the kettle from the power base.
Open the kettle lid and then fill the kettle
with 1.0 L of water. Do not fill the kettle
with water of which amount is more
than 1.0 L.
3. Remove the brewing basket from the
brewing basket guide rail and add your
required tea leaf into the brewing
basket, then replace the brewing basket
well in position. Then close the kettle lid.
4. Position the kettle on the power base.
5. Connect the plug into a power outlet. All
the indicators on the control panel will
light solidly for 3 seconds, and then only
the LCD display, the indicators of the
two “Custom” and the indicator of
“TEA Strength/Keep warm” button light
solidly. And the “Temperature” shown in
the LCD display is 212°F (100°C), and
the “Time” is 3:00 .The appliance enters
into the standby mode.
6. Press the “Tea Type” button to select
the corresponding type of tea, and the
corresponding indicator of the selected
type of tea lights up. And you can set
your desired tea-brewing temperature
by the “
” buttons at the left of the
LCD display.
7. Press the “TEA Strength/Keep warm”
button if you need to select the strength
of tea, and the corresponding indicator
of the selected strength turns on. And
you can set your desired tea-brewing
time by the “
” buttons at the right
of the LCD display.
8. Press “TEA/ Cancel” button, its
corresponding indicator turns on, both
the indicators of the selected tea type
and the selected tea strength as well
as the indicator of “TEA Strength/Keep
warm” button light up, and the LCD
display shows the current water
temperature and the time. And the
appliance starts to brew water.
9. When the water temperature reaches the
preset temperature, the brewing basket
will go down into the water for brewing
the tea, and the brewing time will start
to count down. When the count-down is
finished, the brewing basket will go up
automatically, the tea-brewing process
is finished.
NOTE:
If the preset temperature is 212°F
(100°C), the appliance will heat the water to
212°F (100°C) and then stop heating. If the
preset temperature is not 212°F (100°C), the
appliance will stop heating when the water
is heated to the temperature which is 10°
lower than the preset temperature, then the
appliance will heat the water to the preset
temperature and then stop heating.
NOTE:
You can press the “TEA/ Cancel”
button to cancel the tea-brewing process
during working.
10. When the tea-brewing is finished, if the
“Keep warm” function is activated, three
beeps can be heard and the appliance
will enter into the keep-warm mode. At
that time, the LCD display shows the
real-time temperature and the keep-
warm time starts to run. After keeping
warm for 30 minutes, the LCD display
and all the indicators turn off, and the
appliance will enter into the sleep mode.
NOTE: The appliance will keep warm at
140°F (60°C) if the real-time temperature is
higher than 140°F (60°C). And the appliance
will keep warm at the real-time temperature
if the real-time temperature ranges between
105°F and 140°F (40°C and 60°C).
11. When the tea-brewing is finished, if the
“Keep warm” function is canceled, five
beeps can be heard and the appliance
will stop working. If there is not any
operation within 5 minutes, the LCD
display and all the indicators will turn
off, and the appliance will enter into
the sleep mode.
NOTE:
The appliance has a memory
function, which means that the appliance
will work according to the settings saved
at the last working cycle of brewing tea
until the unit is unplugged.
