10
11
iii. SETTING THE “AUTO START”
FEATURE
Enter setting auto start time mode then
activate auto start feature
1. Press and hold the “AUTO START”
button for 2 seconds to enter setting
auto start time mode
2. The auto start button surround indicator
will illuminate, and “TEA/Cancel” & “Hot
Water” button indicator blink. The LCD
screen will display AUTO START
clock symbol, and a blinking “Current
time” and “Start time”.
3. Set the current time by the “
”
buttons at the left of the LCD display.
Set the start time by the “
” buttons
at the right of the LCD display.
4. Once current time and start time are
programmed, press either the flashing
HOT WATER or TEA/CANCEL button to
select which feature you would like to
start at the programmed time.
5. The LCD screen will display the current
time and start time, in addition to the
AUTO START symbol. The AUTO
START button surround will illuminate
and HOT WATER or TEA/CANCEL
button surround illuminate, which
indicating that the AUTO START feature
has been activated.
6. Once the selected START TIME is
reached, the tea maker will automatically
start water heating or tea brewing cycle.
At this time, the AUTO START button
surround LED turn off.
NOTE:
If user does nothing for 5 seconds
during AUTO START set mode, the set
mode will automatically exit. And confirm
the set time.
iv. RE-SELECTING AUTO START
FEATURE BY USING PREVIOUS
START TIME
1. Press the AUTO START button once.
The HOT WATER and TEA/CANCEL
buttons will flash, and the AUTO START
button surround illuminate, the LCD
screen will display the current time
and start time and AUTO START
clock symbol.
2. Press either the HOT WATER or TEA/
CANCEL button to re-select the desired
function. The AUTO START feature has
been activated by using previous pre-set
time.
3.
NOTE:
The AUTO START feature can be
canceled anytime by pressing AUTO
start button. The AUTO START button
surround LED turn off.
NOTE:
To set the brew temperature and
brew time before using AUTO START
feature, once selected start time is reached,
the tea maker will automatically heat the
water or brew the tea according to the
pre-setting temperature and steeping time.
NOTE:
After pressing the AUTO START
button, press “
” or the TEA TYPE or
TEA STRENGTH buttons, the tea maker
will exit auto start function and activate
the selected function.
BOIL-DRY PROTECTION
Your TEA MAKER is equipped with boil-dry
protection. If it starts heating without
enough water in the unit, the heater will
automatically shut off to avoid damaging
the heating element. The lights will flash
and the unit will beep to alert you. Once the
kettle has cooled down, lift it off the base,
then replace it to reset and restart the
heating cycle.
The quickest way to cool down the heater
is to fill the kettle with cold water; however,
you can also wait for it to cool down
by itself.
