12
ASSEMBLY INSTRUCTIONS
5. Attach Rear Beam
5.1. Loosen 4pcs pre-assembled M6X16mm Screws from Left Back Leg (27) and Right Back Leg (13),
leave the screw heads protruding approximately 5mm.
5.2. Hang Rear Beam (12) onto Left & Right Back Leg on the screws and hand tighten only the screws
on this point.
6. Assemble the front panel
6.1. Loosen 8pcs pre-assembled M6X16mm Screws from Left Front Leg (25) and Right Front Leg (18),
leave the screw heads protruding approximately 5mm.
6.2. Attach Front Panels (21) to the cart and fasten the screws as shown. Then fully tighten all the
screws of rear beam this time.
21
25
18
21
21