Cuisinart BFP-650, Инструкция и книга рецептов

Страница: 8 / 24

8
FOOD PROCESSOR FEATURES
1. Food pusher with drizzle hole
2. Work bowl cover with feed tube
3. Stainless steel chopping/mixing blade
4. Stainless steel reversible slicing/shredding disc
5. Adapter stem
6. Clear work bowl
7. Gearbox collar
8. Motor base
(not shown)
Used for both the
blender jar and the food
processor bowl
FOOD PROCESSOR ASSEMBLY,
USE AND CARE
Please note that the bowl with collar will fit on the base in
four different positions. The handle can be in front or on
either side, and the feed tube in front, back or on either
side.
Directions for use reference a certain position for
instructional purposes only.
FOOD PROCESSOR ASSEMBLY FOR CHOPPING,
PURÉEING AND MIXING
1. Place collar onto motor base.
2. Place work bowl onto the collar with handle facing
front. Twist clockwise to lock onto collar.
3. Place chopping/mixing blade over shaft in work bowl.
Chopping blade should slide easily to the bottom of
the bowl. Lower blade will almost touch bottom of
bowl.
BE SURE TO HANDLE THE METAL BLADE WITH
CARE AS IT IS RAZOR SHARP!
4. Place food to be processed in work bowl. Put cover
on work bowl and turn the cover clockwise until it fits
into position. Cover lock must click into locked
position prior to use. If you have trouble fitting the
cover on the work bowl, turn chopping blade hub
slightly and replace cover.
5. The food pusher fits in feed tube with the more
rounded side toward the outside of the bowl.
ALWAYS USE PUSHER TO GUIDE FOOD
THROUGH FEED TUBE. NEVER USE YOUR
FINGERS OR SPATULA.
6. Plug your Cuisinart
®
VELOCITY Ultra Trio 1 HP
Blender/Food Processor with work bowl into a wall
outlet. Push the On/Off button and then the High
button to start chopping or puréeing. It is
recommended that one hand be placed on the food
processor lid while in use, to provide unit stability. If
the machine doesn’t start, make sure it is plugged in
and the work bowl and cover are locked into place.
The food processor will not start until the collar, work
bowl and work bowl lid are locked into place.
Nevertheless, always unplug the unit before placing
hands into the food processor bowl.
NOTE:
The
motor base will start, but the food processor blade
will not turn until assembled properly.
FOOD PROCESSOR ASSEMBLY FOR SLICING
AND SHREDDING
1. Unplug unit. Place gearbox collar onto motor base.
2. Place workbowl onto the collar with handle facing
front. Twist clockwise to lock onto collar.
3. Place adapter stem onto the center shaft. To slice:
Attach disc to stem with the raised edge of slicer on
top.
To shred: Attach disc to stem with the raised
shredding slots on top. Be sure to handle the metal
blade with care, as it is razor sharp.
4. Place cover on work bowl and turn cover clockwise
until it fits into position and locks. Insert food into
feed tube.
5. Hold pusher with the more rounded side toward the
outside of the bowl and insert it in feed tube over
food. Always use pusher to guide food through feed
tube. Never use your fingers or spatula.
6. Plug your Cuisinart
®
VELOCITY Ultra Trio 1 HP
Blender/Food Processor with work bowl into a
household electrical outlet.
7. To remove cover, unlock it by turning it
counterclockwise, then lift it straight up.
1.
2.
3.
4.
5.
7.
6.