•
Install SF396 on to the
SF349-1 cable using the
hardware that was
provided with SF396.
•
Replace the bottom fork on
the camera with the
SF349-1 cable.
•
Note:
Do not force the
mounting block down.
When aligning the cable
connection you should feel
the mounting block slide
into place.
•
Loosen the four screws on
the top clamp of SF380,
slide the camera into the
channel, and tighten the
four screws to secure
camera.
•
Plug the SF349-1 cable into
the 4-pin receptacle shown.
•
Insert the end of the blue
tubing into the PTC fitting
shown. Make sure the
tubing is properly mated.
•
The mounting block of the
SF349-1 cable should sit
between the two alignment
pins on SF380.
23
SF973-INST
Alignment Pin
