•
Remove the stem plugs
from 90° Push To Connect
(PTC) fittings and retain for
future use. These should be
installed when the unit isn’t
being used.
•
Insert on end of the black
tubing to the 90° PTC fitting
that corresponds with the
black tubing on the SF382.
•
Repeat for the blue and red
tubing.
•
Make sure all tubing is
properly mated with the
PTC fittings.
•
Note:
Don’t kink/pinch the
tubing or cable when
routing and securing with
hose clamps.
•
Route the tubing and the
yellow cable through the
tubing clamp and secure
with washer and screw.
•
Hardware:
•
1X – 121108
•
1X – 101736
•
1X – 101001
13
SF973-INST
