CUES flexitrax C550c, Руководство по эксплуатации

Страница: 87 / 286

C550c Operation Manual
4 System assembly
www.cuesinc.com | 87
W-Skids
(Optional) Use the 8" (200mm) W-Skids to center a 2" (50mm) camera in an 8" (200mm) pipe or to help
center the camera in larger pipes. To install the W-Skids:
1 Position each of the three W-Skids onto the collar and fix firmly with two M5 x 12mm screws each.
The skids are asymmetrical and can only be fitted one way round.
2 Loosen the two M6 x 20mm screws that hold the two halves of the collar together and insert the
flexisonde with the camera attached into the collar.
3 Make sure the camera is touching the screw end of the collar. Then tighten the two M6 x 20mm
screws evenly and firmly to re-tighten the collar.
4.7 Battery
The C550c controller has an internal lithium-ion (Li-ion) battery.
You must fully charge the battery before using the system for the first time. You can also power the
controller from a 12-24V DC vehicle supply.
A fully charged battery will power the controller for around 4 to 6 hours. The actual battery life will
depend on usage and system configuration. For example, if screen brightness is set to maximum and
WiFi is permanently enabled, the battery will drain faster.
For charging the battery and replacing the battery at the end of its useful life, see pages 89 to 92 .