Cuchen WHA-LX1000iDUS Series, Руководство пользователя

Страница: 28 / 64

28
Check the information below before contacting the service center.
A fully functional cooker may appear to be malfunctioning if you are not familiar with the cooker’s use or due to easily
correctable causes. Troubleshoot by referencing the information below, and it might be possible to solve simple issues
without having to contact the service center. If the problem persists, then contact the service center.
Problem Check Solution
1. Unable to cook.
Takes too long to
cook.
• Is the power cord plugged in?
• Has the power gone out while
cooking?
• Did you press the CANCEL button
or any other button while cooking
was in progress?
• Were you cooking in GABA mode?
Plug in the power cord securely.
If the power has gone out for an
extended duration of time, start over
again.
Do not press any other button while
cooking is in progress.
Cooking in
GABA mode takes
approximately 2 to 3 hours.
2. Water is spilling out
during cooking.
• Is the pressure cap at a tilt?
• Did you use the measuring cup?
• Have you added the right amount
of water?
• Have you made the right mode
selection?
Straighten the pressure cap.
3. The rice is getting
overcooked or
undercooked.
• Have you added the right amount
of water?
• Is the bottom of the inner pot free
of debris and buildup?
Use the appropriate scale and add the
right amount of water for the number of
servings being cooked.
Remove debris and buildup from the
automatic temperature sensor.
4. Steam is escaping
from the side of the
lid.
• Are there any grains of rice stuck
to the pressure packing?
• Have you been replacing the
pressure packing on time?
• Is there pressure packing worn?
Clean the top rim of the inner pot and
the contact surface of the pressure
packing.
If steam is escaping, tilt the pressure
cap back to depressurize the cooker.
Unplug the cooker and contact the
service center. (the pressure packing is
a consumable part)
The pressure packing should be
replaced every 12 months.
5. message is
shown.
• This error message indicates that
pressure (due to clogged pressure
regulation nozzle) or temperature
inside the cooker is too high.
Please contact the service center.
6. Unable to use the
Preset option.
• Is the Preset option available for
the selected cooking mode?
Make sure Preset is available for the
selected mode. (See p.20.)
Please troubleshoot before contacting the service center.
WHA-LX1000iD_ENG.indd 28 2017-06-21 �� 3:51:27