Cub Cadet Z-Force S 54, Руководство оператора, Страница: 10 / 36

10 s
ectiOn
2— a
sseMbly
& s
et
-u
p
Remove the two shoulder bolts and lock nuts in the seat 2.
pan as shown in Fig. 3-3.
Rotate the seat into position and secure the seat into place 3.
with the previously removed shoulder bolts and lock nuts.
Be careful not to crimp or damage the wire harness while
installing the seat. See Fig. 3-4.
Adjusting the Seat
To adjust the position of the seat, push the seat adjustment lever
to the left. Slide the seat forward or rearward to the desired
position; then release the adjustment lever. Make sure seat is
locked into position before operating the tractor. See Fig. 3-5.
Install the Rear Hitch Bracket
Remove the hex flange screws and flange lock nuts that 1.
secure the hitch bracket and muffler mount bracket to the
bumper bracket. See Fig. 3-6.
Figure 3-3
Figure 3-4
Hex Flange
Screws
Flange
Lock
Nuts
Hitch
Bracket
Muffler Mount
Bracket
Figure 3-6
Figure 3-5