background image

2

Finding and Recording Model Number

Table of Contents

This Operator’s Manual is an important part of your new snow thrower. It will help you assemble,  

prepare and maintain the unit for best performance. Please read and understand what it says. 

Customer Support .............................................. 2
Safety Labels ...................................................... 3
Safe Operation Practices ................................... 4
Setting Up Your Snow Thrower .......................... 6
Operating Your Snow Thrower ........................... 8
Making Adjustments ........................................ 12

Maintaining Your Snow Thrower ...................... 14
Off-Season Storage .......................................... 20
Troubleshooting ................................................ 21
Illustrated Parts List ......................................... 22
Warranty ....................................................... 31-32

BEFORE ASSEMBLING YOUR NEW EQUIPMENT, 
please locate the model plate on the equipment 
and copy the information to the sample model plate 
provided to the right. You can locate the model plate 
by standing at the operating position and looking 
down at the rear of the snow thrower. This information 
will be necessary to use the manufacturer’s web site 
or when obtaining assistance from an authorized Cub 
Cadet dealer.

Customer Support

If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of this 
unit, you can contact the dealer you purchased the unit from or choose from the options below:

1.  Visit 

cubcadet.com for many useful suggestions. Click on 

Customer Service or the Service Locator to find the nearest 

Cub Cadet service dealer in your area. 

2. To reach the Customer Dealer Referral Line, please call 

1-877-282-8684.

3. The 

engine manufacturer is responsible for all engine-

related issues with regards to performance, power-rating, 

specifications, warranty and service. Please refer to the 

engine manufacturer’s Owner’s/Operator’s Manual, packed 

separately with your unit, for more information. 

 

Содержание 26





























Отзывы: