CTP Systems dBbox3 Скачать руководство пользователя страница 11

Страница: 11 / 17

More

The more menu enables selection of the Timecode reader, Timecode generator,

Tone Loop, 2Wire listen and Cable Test.

More/Read Timecode

This option reads linear timecode at 24, 25, 29.97 and 30 frames per second using

the Ana in L XLR. The timecode is also output through the Ana XLR outputs so it may

be used as an ‘in line’ check. If the drop frame flag is set in the timecode stream then

‘DF’ will be displayed at the end of the time readout. The reader will resolve

timecode down to a level of -30dBu. The timecode may be monitored and metered,

the meter will follow whichever type has been selected in ‘setup/ ana meter’. (PPM

or VU).

More Read Timecode

Freeze

Press select while this is highlighted to

freeze the timecode display. When

selected it will change to read. Select

again to restart the display

More Read Timecode

nnFPS

This selects the frame rate range for the

reader. Set to 25FPS for 24 or 25FPS or

30FPS for 29.97 (dropframe) or 30FPS.

More/Generate Timecode

This generates test linear timecode at 24, 25, 29.97 (dropframe) and 30 frames per

second using the Ana out L XLR. Level is set at 0dBu.

More Generate Timecode Start

Press select while this is highlighted to

start timecode generation. Generation

will start at the time displayed. When

started the display will change to ‘Freeze’. Select again to stop the timecode.

Timecode continues to be generated at the frozen time.

More Generate Timecode Clear

This will set the timecode generated to

00:00:00:00.

Содержание dBbox3


















Результаты поиска

Содержание dBbox3

Отзывы:

Похожие инструкции для dBbox3

Бренды по названию

Популярные бренды

CTP Systems dBbox3, Руководство пользователя

Результаты поиска

Содержание dBbox3

Отзывы:

Похожие инструкции для dBbox3

Бренды по названию

Популярные бренды