40
Section 2 System Programming
2.69 Delay / Reverse Charge Mode
Format:
* 85 0 MN # (Delay Charge)
Format:
* 85 1 # (Reverse Charge)
MN = Delay Time = 10sec to 60sec
Delay Charge:
PC software will start to charge after assigned time even if the
called party is no answer.
Reverse Charge:
PC software will start to charge only when called party is lifts
the handset. You should apply Reverse Charge service from Telecom Office first.
2.70 Second & Third Outward Code
Format
* 97 1 A MN #
(Assign Second Outward Code)
Format:
* 97 2 A MN #
(Assign Third Outward Code)
A = Second outward code = 1 to 8
MN = Special CO line serial port number = 01to 16
When the user make external call by second or third outward code, the system will auto-
search CO line start from MN.
Description:
Have two kinds of CO lines from different telecom office. Such as
normal CO line and VOIP CO line (special CO line).
The user can select VOIP line to make external call (Refer 3.4 page 44), if the
selected VOIP line is busy, the user has to select CO line again.
To more convenient operating, the user can make external call by dial second
outward code, thus the system will auto search free CO line start from MN.
Example:
Have seven normal CO lines port 1 to port 7, and five VOIP lines port 8
to port 12 (MN=08). You can assign auto-search VOIP CO line by dial 3 ( A =3).
1. Prefix digit of extension number is not allowed as same as the second
outward code.
Example,
second outward code is 3, any extension number
with prefix digit 3 are invalid.
2. Connect special CO line in series behind normal CO line.
When dial 0, the line will enter normal free CO line first, if all the normal
CO lines are busy, system will auto-search free special CO line.
When dial second outward code, the line will not enter normal CO line,
but auto-search free special CO line start from MN.
3. The user can use special CO line that in self-group only.
4. The direct external mode extension should dial * A to enter CO line.
2.71 Delete Second or Third Outward Code
Format
* 97 1 #
(Delete Second Outward Code)
Format
* 97 2 #
(Delete Third Outward Code)
Pick up 8001 Input * 971308 # Du Hang up
and unlock
*
9 7
0
3
8
#
1