Format:
* 3 2 ABCDEFGH #
ABCDEFGH = CO Line ports of No.2 card = 1 to 8
Description: Assigns which external ( CO ) line is connected to which CO line port.
Example :The port 1, 2,3,4,5 of No.2 CO line card is connected with CO lines, it is
correspond to CO line 9, 10, 11, 12, 13.
3
*
4
1
1
#
2
3
*
3
1
2
4
2
Pick up 8001(unlock) Input * 32 1 2 3 4 5 # Du Hang up
2.10 Enable External (CO ) Line ( No.2 CO Line Card )
#
5 #
#
16
Section 2 System Programming
1. This format is only function for model DK,VK.
2. The port number 1 to 8 of No.2 CO line card are correspond to actual CO
line 9 to 16.
3. The line will priority enter the idle lower CO line port when internal
extension make external call. Example
,
CO line 1,2,3,4,5 have been
connected, the extension A will access CO line 1, meanwhile, extension B
will access CO line 2.
To reduce the CO lines are occupied by the outgoing calls , we suggest to
connect the high-frequency used CO lines that for external call incoming
to the higher CO line port
4. The CO line can be connected do not accord to the order, for example, we
can connect CO line 1,2,5,6,7,8, leave the port 3 and 4 are vacant.
2.11 Disable No.2 CO Line Card
Format
* 32 #
Description: When the No.2 CO line card is not installed or it has not CO line,
please close/disable it to avoid no response when pick up extension.
2.12 Disable All CO Lines
Format
* 3 #
Description
When no CO line card is installed or CO line card has not CO line,
please close all CO lines to make PABX is at Intercom mode.
Example: Assign PABX at Intercom mode when no CO lines are connected.
3
*
3
*
Pick up 8001(unlock) Input * 3 # Du Hang up
#
#
