CTI 2500P-J Series, Инструкция по установке и эксплуатации

Страница: 28 / 82

28
CTI Janus Programmable Automation Controller IOG
Web Server IP Address Configuration
Once your PC and the controller are on the same subnet, you can configure the IP address via the embedded web
server.
•
Access the embedded web server by typing the IP address of the controller into the URL box of your
browser and pressing the E
NTER
key.
•
Navigate to the C
ONFIGURATION
/N
ETWORK
S
ETTINGS
page.
•
Ensure the S
TATIC
button is selected.
•
For the Primary IP Subnet configuration, enter the parameters for the IPV4 Address, Subnet Mask, and
Default Gateway
•
Click on the A
PPLY
button to accept the entries and initiate the update.
After the update is complete, the connection will be lost. To re-access the server, you will need to enter the new IP
address in the browser URL box.
For additional details regarding network settings, see Section 4.2 .
Other Controller Configuration Options
You may also use the embedded web server to configure other controller characteristics, including:
•
Startup and Alphanumeric Display Options - See Section 4.1 General Settings .
•
Authentication and Encryption Options – See Section 4.3 Security Settings ,
•
Clock Setting or Time Synchronization Method – See Section 4.4 Clock Settings .