32
CTI Janus Programmable Automation Controller IOG
4.4
Clock Settings
Navigate to the C
ONFIGURATION
/
C
LOCK
S
ETTING
s web page
Set or Synch Time Method:
•
Set Current Time:
Sets clock via manual entry of the time and date and/or use of CTI_PLC_SET_RTC
function block in a logic program
•
Use Remote NTP Server:
Obtains the time from an NTP (Network Time Protocol) server.
•
Use Data Cache Client Host:
Sets clock with time read from the CTI 2500 Series Host PLC
–
requires use of
the Enhanced Data Cache fieldbus protocol.
Date / Time:
If manually setting the time, you should enter the time and date in these boxes.
The following entries are required only when
Use Remote NTP Server
is selected:
•
Time Zone Region:
Select the region of the time zone.
For example, in the U.S you would select “Americas”.
•
Time Zone Cities:
Select a city or area in your time zone.
For example, in the Eastern Time zone, you might select New York.
•
Host IP Address:
Enter IP Address of the network device acting as NTP Server
Click on the
A
PPLY
button to update settings. An error message will be displayed if there is a problem with your
entries. Otherwise, a confirmation message will be displayed indicating that the parameters have been updated.
New parameters will go into effect immediately.
