CTEK CGC500, Руководство по установке

Страница: 5 / 35

8 9 CTEK AB CTEK AB
EN
EN
2
4
3
1
1. Activate NanoGrid™
3
2
1
2. Upload NanoGrid.ini.
To configure the CGC500™
Configure the CGC500™ from the built in Web GUI accessed from the Ethernet interface marked “Service”.
Note:
To install and activate NanoGrid™ see “CCU NanoGrid Configuration Manual, Pd_CM_004”.
3
5
3. Reboot.
2
1
To recycle the product
The product must be recycled as electronic equipment. Follow the local requirements for recycling of elec-
tronic equipment.
References
1. CCU NanoGrid Configuration Manual, Pd_CM_004
To verify the installation
When the CGC500™ is configured and enabled enter: Nanogrid - > Grid UI in the WebUI.
1. Verify that all active charging stations are connected to the CGC500™ with a green mark in the “On-
line” column.
2.
Connect an electric vehicle to a charging station. Verify that the electric vehicle gets allocated current
and that “State” is updated to “ActiveCharging”.