CTE PIANOPLAN 600 J SPEEDY STANDARD, Руководство по техническому обслуживанию оператора, Страница: 42 / 62

Operator’s and Maintenance Manual
Pianoplan 600J Speedy Standard
CODE
504196
42
10.4. Three-month checks
1. Oil tank level control
Normally, if there are no oil leaks, the oil in the
tank is neither topped up nor changed.
However, we advise you to check the level using
the transparent indicator glass, after having let the
PIANOPLAN stand on a perfectly horizontal
floor.
Normal oil level
Oil refill
2. Check and registration in the control register of the anchor belts and straps of the
load
Confirm the good state of the belts and straps, especially near the stitching. If they are
frayed or crushed, replace them immediately. Check also the tension and all the parts of
the belt that must be mechanically intact, complete and efficient.
ATTENTION : it is prohibited to use greased or wet
belts and bands, or belts which are not authorized by
the manufacturer.